Choose a forklift by the weight and dimensions of the load, the required lift height and the space available to manoeuvre. GETSUP in Mississauga, Ontario offers counterbalance forklifts, four-directional forklifts, reach trucks and very narrow aisle (VNA) stackers. This guide compares the listed configurations; the supplied truck's load plate is the authority for capacity.
Which type of truck fits your warehouse?
- Counterbalance forklift: a starting point for general pallet handling and loading where the truck has enough turning space.
- Four-directional forklift: consider sideways travel when moving long loads such as lumber or profiles.
- Reach truck: consider this format for placing pallets in warehouse racking; confirm the floor, pallet access and aisle layout.
- VNA tri-lateral stacker: a rotating fork head accesses either side of a narrow aisle. Verify the complete aisle design, clearances and any guidance requirements before selecting it.
- Electric pallet truck: for horizontal pallet transport rather than lifting to high racking. Compare pallet trucks and walkie stackers for lower lifting requirements.
Compare the listed GETSUP models
| Model | Truck type | Listed capacity | Lift configuration | Key point to confirm |
|---|---|---|---|---|
| SANY C6 series | Counterbalance | 5,000–10,000 lb across model options | Confirm selected mast | Model, mast, battery and charger |
| CPD20SA | Three-wheel counterbalance | 2,000 kg nominal | 3,000 mm | Battery type and doorway clearance |
| CSD20 | Four-directional | 2,000 kg nominal | 4,500 mm | Long-load dimensions and side-travel space |
| CQDH18C | Single-scissor reach truck | 1,800 kg nominal | 6,500 mm | 500 mm reach travel and pallet fit |
| CQD20-D | Reach truck | 2,000 kg nominal | 8,000 mm | Reference capacity is 1,500 kg at 8 m and 600 mm load centre |
| OPD15L | VNA tri-lateral stacker | 1,500 kg nominal | 7,500 mm | Aisle clearances, rotating head and guidance requirements |
These figures describe the configurations currently listed by GETSUP, not every configuration in a manufacturer's range. Nominal capacity is not guaranteed at maximum lift height. Confirm residual capacity at your actual load centre, height and attachment configuration.
Measurements to send with your enquiry
- Load: heaviest loaded pallet, length, width, height and any uneven weight distribution.
- Racking: highest placement height, beam and pallet dimensions, clear aisle width and end-of-aisle turning space.
- Clearance: lowest doorway, overhead obstruction, container or trailer opening. Compare the truck's lowered mast and overhead guard heights.
- Site: floor condition, gradients, dock plates, indoor or outdoor operation and unloading arrangements.
- Duty cycle: daily operating hours, travel distance, lifts per shift and charging opportunities.
- Electrical supply: available voltage and phase. Several listed specialist configurations specify 220V three-phase charger input; confirm the supplied charger before purchase.
Availability, pickup and delivery
Use the individual product page for the current price in CAD and purchase status. CPD20SA, CSD20 and CQDH18C were added as stocked models; OPD15L and CQD20-D are special-order models. Inventory can change. Contact GETSUP to confirm availability or order lead time, local pickup in Mississauga and freight to your postal code.
Frequently asked questions
Can a 2,000 kg forklift lift 2,000 kg at any height?
No. Capacity depends on lift height, load centre, mast and attachments. For example, the CQD20-D reference chart lists 1,500 kg at 8,000 mm with a 600 mm load centre. Check the supplied load chart against your heaviest load.
Is a four-directional forklift the same as a reach truck?
No. Four-directional travel helps move long materials sideways. A reach truck extends its mast or fork mechanism to position pallets in racking. Choose by the actual load and warehouse layout.
Will a VNA truck work in my existing aisles?
Do not choose it from aisle width alone. Pallet dimensions, load overhang, racking, clearances, turning areas and any guidance system must be checked together.
Can I plug every electric forklift into a regular outlet?
No. Charger voltage, phase and current are model-specific. Send GETSUP the available electrical supply and confirm the exact supplied charger before ordering.
Plan the complete handling area
Compare forklifts and reach trucks, pallet racking and the stacker versus pallet truck versus forklift guide. Browse the industrial buying guide centre for related planning topics.
GETSUP Inc · 2585 Dunwin Drive, Mississauga, ON L5L 3N9 · 905-569-8898 · Request a configuration and freight quote.