Forklift Scale vs Pallet Scale: Which Should You Buy?

Warehouses weigh pallets two ways: drive to a pallet floor scale, or weigh on the forklift itself with weighing forks. Here is how they compare, using the MEASURETEK ECS-B and iFork we stock in Mississauga.

Side-by-Side

ECS-B pallet floor scale iFork forklift scale
Capacity × division 2,200 kg × 0.5 kg (5,000 lb) 3,000 kg × 1 kg
Accuracy note Fixed platform; stable readings ±0.1% with angle compensation
Workflow Drive to the scale, set down, weigh, lift again Weigh while lifting, anywhere in the yard
Installation Flat concrete floor; ramp or pit for pallet jacks Replaces your forks in about 15 minutes; must match carriage class IIIA
Printing Via RS232/USB to a printer or PC Built-in thermal printer
Price Lower Higher
Best for A fixed shipping or receiving station High-volume yards, trucks loaded in many places, avoiding extra handling

Frequently Asked Questions

Is a forklift scale as accurate as a floor scale?

A floor scale usually gives the steadiest reading because the load sits still on a fixed platform. The iFork specifies ±0.1% with angle compensation, which suits load verification and overload prevention.

Will weighing forks fit my forklift?

The iFork 3000 uses class IIIA carriage hooks (installation dimension 508 mm) and 1220 mm forks. Send us your forklift model and fork dimensions for a fit check before ordering.

Can I use a pallet jack with a floor scale?

Yes, with a ramp or by installing the scale in a pit. A forklift can set pallets directly on the deck.

Questions? Call 905-569-8898 (Mon–Fri, 8:30 a.m.–5:00 p.m.) or email info@getsupinc.com. All models are stocked at our warehouse at 2585 Dunwin Drive, Mississauga, Ontario, with local pickup and delivery across Canada. Every scale carries a 1-year GETSUP warranty.